ACSP Consultation 2018.1: ARIN Internet Routing Registry (IRR) Roadmap

Consultation Tracking Information

  • Requested By: Staff
  • Status: Closed
  • Comments Opened: Linked to Discussion Archives: 09 January 2018
  • Comments Closed: 25 April 2018
  • Suggestion Number: Multiple

Consultation Description

Over the last several years, ARIN has received multiple ARIN Consultation and Suggestion Process (ACSP) requests and fielded many customer suggestions about our existing Internet Routing Registry (IRR), and as a result, a community consultation was issued to gauge community interest for ARIN to take on the project of improving this service. The consensus response was that the community would like ARIN to:

  • Improve the validity of the IRR data
  • Work with the other RIR’s on authorization schemes
  • Provide appropriate proxy registration services
  • Integrate/validate with the registration database

To accomplish these goals, we anticipate that this work effort will involve a fair bit of community involvement (RIR communities, IETF, and operational forums such as NANOG and CaribNOG) in order to create the appropriate incremental upgrades to the IRR.

We are opening a new Community Consultation to solicit feedback on the ARIN IRR Roadmap, detailed below.

Please provide comments to You can subscribe to this mailing list at:

This consultation will remain open through 5:00 PM EST on Friday, 9 February 2018.


John Curran
President and CEO
American Registry for Internet Numbers (ARIN)

ARIN IRR Roadmap


In response to multiple ACSPs regarding IRR route validation (i.e. the function whereby route objects are validated via the authorization of the appropriate number resource holder), ARIN conducted an IRR community consultation in April 2015. This consultation was opened because the issues around IRR route validation are complex, and implementation was anticipated to exceed the cost of most ACSP implementations.

Within the consultation, the ARIN community was asked three questions:

  • Should ARIN begin a new project to enable IRR route object validation to the ARIN registry database?
  • If yes, should this effort be coordinated with other RIRs to help facilitate cross-registry authentication?
  • If yes, should this effort also support third party IRR route object authentication?

There were eighteen individual participants in the consultation. Thirteen were in favor of ARIN creating a more robust IRR, two were publicly against, and three were unclear in their support or opposition.

Nine participants expressed support for efforts to facilitate inter-RIR authentication, and eight participants expressed support for 3rd party or proxy registrations for authentication of route objects.

Two participants suggested ARIN provide facilities for authentication/authorization or delegation to IRRs not operated by an RIR.

Several participants had concerns regarding the implementation of an ARIN-validated IRR. Three noted ARIN’s past experience with the implementation and cost of RPKI with respect to both community adoption and opportunity-cost, and one participant expressed concerns for contractual obligations that ARIN may place on resource holders provisioning information in a validated IRR.

Implementation Experience Regarding ARIN’s Current IRR

ARIN initially setup a RIPE-based IRR years ago. Over the years, we upgraded it based on ACSP suggestions: IPv6 support was implemented in December 2009, and PGP support with additional notifications was released in September 2011. In both of these releases, we replicated the original approach of using the RIPE database software system with loose coupling to our mainline ARIN Online registry system. These upgrades did allow for additional functionality, but it came at a very substantial cost of time and unanticipated functionality issues related to the upgrades.

When we undertook these upgrades, we chose to continue the separation in the hopes of doing minimal environmental changes to ARIN’s infrastructure to add the suggested improvements. However, the RIPE codebase was not modularized, with significant dependencies on RIPE environment, and consequently was not ideal for use in ARIN’s environment. One consequence was the repeated need to pull down the latest release from RIPE, adjust the environment for their software to work, make changes to it to allow functionality that we support, remove out dependencies to resource checks that would not exist in our system, and add dependency links to our system. This has been a very labor-intensive process and it took a lot of engineering time to make the system work.

Adjusting to each upgrade from RIPE has also been challenging because of innate differences our database structures. RIPE had two systems – one being a front-end database and the other being a back-end database with manual synchronization between these two systems. At ARIN, we have just one system that is placed behind the firewall and replicated out to the publically available ARIN slaves as changes are made. The RIPE IRR codebase provided for limited information to be shared to slaves via its replication schemes. Given that ARIN’s publically available interface is a slave, the output available to our community was not the same as our internal master, and has resulted in some confusion for ARIN IRR users.

ARIN Registration Services Department also has challenges providing customer support to IRR users. Common problems include:

  • Maintainers not being notified upon changes
  • Cryptic responses to pgp-validation errors
  • General lack of customer support features

It was our hope that code re-use would save time and money. Unfortunately, this was not the case, and the result was an awkward, difficult-to-operate, and user-unfriendly system that requires considerable engineering time to maintain.

It should also be noted that the IRR codebase in use by ARIN is no longer supported or maintained by the RIPE NCC, as they have since completely rewritten their IRR software.

Proposed Roadmap

Given the community feedback received in the consultation, and with due regard to the past experience with reusing code for IRR software, ARIN staff proposes a “ground-up” implementation of a validated IRR that will better integrate with ARIN’s current web portal, provisioning system, and other registry functions. This path forward will be a multi-phased approach and will rely on community–defined specifications and global RIR community consensus.

This approach will allow ARIN to field a routing registry incrementally, providing utility to the community much sooner than a monolithic “big-bang” release, and it will provide the community an opportunity to provide feedback with respect to features and cost as the project progresses.

  • Produce a Simplified Profile of RPSL: Most of the complexity of RPSL comes from routing registry features rarely used by the community. To reduce the implementation costs around data modeling and parsing of complex RPSL structures, ARIN will work with the operational community to identify the most commonly used features of the language, and this subset will be documented as an simplified RPSL profile to be used to guide development efforts.
  • Schedule Frequent Deployments: ARIN will adopt “continuous deployment” strategies to allow for more frequent deployments, similar to the strategy used today in development of the ARIN Online registry system. This will allow the community to use new features of the IRR as they are developed.
  • Collaborate on Cross-RIR Authentication: ARIN will work with the other RIRs engineering coordination activities to create an appropriate mechanism for authentication and authorization of routing registry objects for which the resources cross regional boundaries.
  • Provide an Easy IRR integration tool within ARIN Online: ARIN will provide an simple tool within ARIN online for those users who wish to explore the routing of their existing number resources and after successful review, automatically update their corresponding IRR records to match existing routing.
  • Migrate Data to the New IRR: Where possible, ARIN will create tools and practices to help migrate data from the existing IRR to the new IRR under the authority of resource holders in the ARIN registry.
  • Cooperate on Standards and Best Practices: Where applicable and appropriate, ARIN will work with the IETF and the other RIRs on documenting any resulting operational standards, profiles, and best practices.

We do feel that this effort, once deployed, will help improve routing coordination that exists on the Internet today. The proposed new ARIN IRR will provide a clear and consistent path to allow ISPs to share their routing policies.

ARIN Actions

Please refer to the previous consultation on the IRR for a complete history.

Consultation on ARIN IRR Roadmap Extended through 25 April 2018

Update: 30 April, 2018

ARIN thanks those who provided valuable feedback during this consultation on the ARIN IRR Roadmap. This important feedback will help inform ARIN’s path forward in this area.

Update: 11 July 2018

At the conclusion of the Consultation on the ARIN Internet Routing Registry (IRR) Roadmap, ARIN staff reviewed the feedback received and updated the plan which is available for review at:

We thank the community for their support and input.